Advertisement
Contents
Connections
o Dynamic Volume
Solves the problem of large variations in volume level between TV,
movies and other content (between quiet passages and loud
passages, etc.) by automatically adjusting to the user's preferred
volume setting.
Works with MultEQ
®
.
Heavy:
Medium:
Light:
Off
(Default):
0 If "Dynamic Volume" is set to "Yes" in "Audyssey
automatically changed to "Medium". (v p. 173)
Front panel
Display
Playback
Most adjustment to softest and loudest
sounds.
Medium adjustment to loudest and
softest sound.
Least adjustment to loudest and softest
sounds.
Do not use "Dynamic Volume".
®
Setup", the setting is
Rear panel
Settings
Graphic EQ
Uses the graphic equalizer to adjust the tone of each speaker.
0 Speakers for which "Graphic EQ" can be set differ according to the sound mode.
0 This can be set when "MultEQ
0 This cannot be set when the sound mode is set to "Direct" or "Pure Direct".
0 If you are using headphones, you can set the equalizer for headphones.
(v p. 154)
o Graphic EQ / Headphone EQ
Set whether to use the graphic equalizer or not.
On:
Off
(Default):
0 "Headphone EQ" is set in the menu when headphones are used.
154
Remote
Tips
Appendix
®
" setting is "Off". (v p. 152)
Use the graphic equalizer.
Do not use the graphic equalizer.
Index
Advertisement
