Assembly - Easy@Home FJ142L-120-500 User Manual

Assembly

Attach vacuum head

Insert the vacuum head (7) into the hole on the bottom of the vacuum
canister (8). You will hear an audible click.

To disassemble the vacuum head from the vacuum canister, press the
vacuum head release button (25) on the canister, then pull the vacuum
head out slowly.
Attach handle

Insert the handle pole (3) into the handle (1) until you hear an audible click.
Insert the handle pole, with tool storage clip (4) facing forward, into the
hole on top of the canister. You will hear an audible click. Make sure the
handle pole is secured.

To disassemble the handle, press the handle pole release button (20) then
slowly pull out handle.
Attach dust container

Place bottom of dust container (11) onto canister body. Dust container is
secure when you hear an audible click.
DO NOT USE ANY ABRASIVE MATERIAL TO CLEAN THE SURFACE
DO NOT IMMERSE THE UPRIGHT VACUUM INTO WATER AT ANY TIME
4
Assembly