Checking The Product And Scope Of Delivery; Product Assembly - Easy@Home VC9385S User Manual

Checking the product and scope of delivery

NOTICE!
Risk of damage!
If you are not cautious when opening the packaging with a
sharp knife or other pointed object, you may quickly damage
the product.
− For this reason, be very careful when opening it.
1. Take the product out of the packaging.
2. Check to make sure that all parts are included (see Fig. A).
3. Check whether the product or individual parts are damaged. If this is the
case, do not use the product. Contact the manufacturer via the service
address indicated on the warranty card.

Product assembly

CAUTION!
Risk of injury!
Improper handling of the product may cause injury.
− Do not connect the product to a power outlet until it is fully
assembled.
− Do not operate the product without the handle being
firmly screwed into place.
1. Set the product in an upright position.
2. Place the handle
Make sure that the cord clip
3. Using a crosshead screwdriver
the handle and fasten them securely (see Fig. B).
Do not overtighten the screws, as this could strip the screw holes.
firmly onto the main body of the product (see Fig. B).
1
13
is on the same side as the cord hooks
22
Checking the product and scope of delivery
, drive one screw 18 into each side of
14
.
13