Lower Anchor Removal & Seat Adjustments; Securing The Child - Diono Monterey 4DXT Instruction Manual

Booster seat
Hide thumbs Also See for Monterey 4DXT:
Table of Contents

Advertisement

Available languages

Available languages

LOWER ANCHOR REMOVAL & ADJUSTMENTS
DISENGAGING LOWER ANCHOR INSTALLATION
Follow the previous instructions in reverse order.
1.
Reach under the bottom of the booster seat and depress the cam
lock lever while pulling the seat away from the vehicle seat back until
the lower anchor straps are extended all the way.
2.
Disconnect LATCH connectors from vehicle anchors.
3.
Pull lower anchor adjuster straps to recess the LATCH connectors
into the back of the booster seat bottom for safe storage.
IMPORTANT:
Do not use LATCH if installation interferes with vehicle seat belt.
ADJUSTING THE HEAD SUPPORT
The head support height can be adjusted for best fit
to your child and to ensure proper placement of the
Vehicle Shoulder Belt. Squeeze the head support
adjustment lever on the back of the booster seat while
adjusting its height up or down to fit the child.
ADJUSTING BACKREST WIDTH
To adjust the width of the seat back, turn the dial on the
back of the backrest clockwise to increase width. Turn
counterclockwise to make the backrest narrower.
NOTE:
It may be easier to adjust backrest width prior to
securing the booster seat installation using LATCH.
18
1-855-463-4666
WARNING!
Use ONLY the lap and shoulder belt
system when restraining the child in this booster
seat.
DO NOT
use lap belt only.
1.
Place booster seat on vehicle seat so it is resting
firmly on vehicle seat bottom and touching the
vehicle seat back. A gap is acceptable as long as
the head support is touching the vehicle seat
back or head rest.
2.
Properly position child: sitting upright and seated
all the way back in the booster seat.
3.
Adjust head support to proper height: The
shoulder belt guide should be slightly above the
child's shoulders (at least 1 cm). Squeeze the head
support adjustment lever on the back of the
booster seat while adjusting it's height up or
down to fit the child.
4.
Feed the vehicle diagonal shoulder belt portion
of the seat belt through the
guide into the side of the seat opposite the seat
belt buckle.

SECURING THE CHILD

RED
RED
shoulder belt
diono.com
19

Advertisement

Chapters

Table of Contents
loading

Table of Contents