Download Print this page

Easy@Home EE-3186A User Manual page 8

Ultrasonic cool mist humidifier
Hide thumbs Also See for EE-3186A:

Advertisement

Getting Started
Getting Started
Getting Started
Getting Started
Before Each Use
Before Each
Before Each
Before Each
CHECK HUMIDIFIER PLACEMENT
CHECK HUMIDIFIER PLACEMENT - Place the Humidifier on a non-metallic, lint free, waterproof, level
CHECK HUMIDIFIER PLACEMENT
CHECK HUMIDIFIER PLACEMENT
surface for best performance. This is to help disperse the mist in the air and prevent it from being
knocked or tipped over.
CHECK WATER LEVEL SENSOR
CHECK
CHECK
CHECK
WATER LEVEL SENSOR
WATER LEVEL SENSOR – Make sure that the water level sensor is secured properly. Refer to
WATER LEVEL SENSOR
"cleaning and maintaining water level sensor" on page 12 for instructions on how to assemble
the water level sensor.
CHECK FAN VENT
CHECK FAN VENT
CHECK FAN VENT
CHECK FAN VENT
This fan vent is located on the bottom of the
humidifier. The purpose of the Fan Vent is to
blow the cool mist through the vapor outlet
slots. It is important that this part is kept clean
and free of obstructions. We recommend
checking the fan vent before using this item
(i.e. lint, paper).
Do not place humidifier on top of a towel, or a
carpeted surface. The fan vent on the bottom
may become blocked, and overheat the
humidifier.
CAUTION:
CAUTION:
CAUTION:
CAUTION:
DO NOT operate the humidifier without water in the water
DO NOT operate the humidifier without water in the water tank.
DO NOT operate the humidifier without water in the water
DO NOT operate the humidifier without water in the water
DO NOT plug in the power supply cord with wet hands; electric shock could happen.
DO NOT plug in the power supply cord with wet hands; electric shock could happen.
DO NOT plug in the power supply cord with wet hands; electric shock could happen.
DO NOT plug in the power supply cord with wet hands; electric shock could happen.
Be sure the humidifier is switched to OFF (O) and the humidifier is unplugged from the
electrical outlet.
Select a location for your humidifier on a flat surface approximately 4 inches away from a
wall.
DO NOT place the humidifier on a finished floor or near furniture which can be damaged by
DO NOT
DO NOT
DO NOT
moisture or water. Place on a water resistant surface.
DO NOT place humidifier on top of a towel, or a carpeted surface. The air vent on the
DO NOT
DO NOT
DO NOT
bottom may become blocked, and overheat the humidifier.
AFTER SALES SUPPORT
Use
Use
Use
1 888 367 7373
1
tank.
tank.
tank.
7
customer-service@wk-usa.com
7 7 7 7
12-18-13 / EE-3186A

Advertisement

loading