Cleaning The Product; Storage; Troubleshooting - Easy@Home VC9385S User Manual

Cleaning the product

1. Unplug the product.
2. Make sure the water solution tank
empty (see chapter "Filling the water solution tank" and "Emptying the dirty
water tank").
3. Use a soft, damp cloth to wipe off the product and accessories. Then let all
parts dry completely.

Storage

NOTICE!
Risk of damage!
Mineral deposits and mildew can form when cleaning solution
and/ or water is left in the tanks, affecting the performance of
the product.
− Do not store the product with cleaning solution left in the
water solution tank or dirty water left in the dirty water
tank.
All parts must be completely dry before being stored.
− Always store the product in a dry area.
− Protect the product from direct sunlight.
− Store the product so that it is not accessible to children.

Troubleshooting

Some problems may be caused by minor faults that you can fix yourself. To
do so, follow the instructions in the following table. If it is still not possible
to resolve the problem, contact customer service. Do not repair the product
yourself.
Problem
The product will not
operate.
Not enough suction
during cleaning.
11
Solution
− Make sure the product is plugged in.
− Make sure that the power outlet is not defective.
− Empty the dirty water tank
the automatic shut-off engaged.
− Make sure the dirty water tank is properly installed.
and the dirty water tank
7
Storage
7
are
; it may be full and
19