Installation; Remove The Doors - Iiglo IIDE234W Instruction Manual

Instruksjonsmanual for: IIDE234W

Installation

Remove the doors

Tool required: Philips screwdriver, flat bladed screwdriver.
● Ensure the units is unplugged and empty.
● To take the door off, it is necessary to tilt the unit backwards. You should reset the unit on something solid so that it
will not slip during the door removing process.
● All parts removed must be saved to do the reinstallation of the door.
● Do not lay the unit flat as this may damage the coolant system.
● It's better that 2 people handle the unit during assembly.
1. Unscrew hinge cover by Philips screwdriver.
2. Disconnect the harness.
Imported by iiglo, Østre Kullerød 4,
N-3241 Sandefjord, Norway
Made in China | www.iiglo.com
8