Acer B123D Series User Manual page 35

H. Position
•
•
V. Position
•
•
Frequency "Frequency" changes the projector's refresh rate to match the
frequency of your computer's graphics card. If you can see a vertical
flickering bar in the projected image, use this function to make the
necessary adjustments.
Tracking Synchronizes the signal timing of the projector with the graphics card.
If you experience an unstable or flickering image, use this function to
correct it.
HDMI Color Range Adjust the color range of the HDMI image data to correct color display
error.
•
•
•
HDMI Scan Info Adjust the overscan ratio of the HDMI image on screen.
•
•
•
Note 1: "H. Position", "V. Position", "Frequency" and "Tracking" functions
are not supported under HDMI or Video mode.
Note 2: "HDMI Color Range" and "HDMI Scan Info" functions are only
supported under HDMI mode.
Note 3: Functions vary depending on model definition.
Press to move the image left.
Press to move the image right.
Press to move the image down.
Press to move the image up.
Auto: Automatically adjust by information from player.
Limited Range: Process the input image as limited color range data.
Full Range: Process the input image as full color range data.
Auto: Automatically adjust by information from player.
Underscan: Always no overscan on HDMI image.
Overscan: Always keep overscan on HDMI image.
25