Advanced Wireless Communications MINI 3 Quick Start Manual

Quick Start Guide
Wireless cloning allows you to easily copy radio settings from one radio (the master)
to all other radios within range without the use of wires or cables.
Master Unit
You will first need to
determine which of your
radios is going to be your
master unit. This will be the
one radio to which all of your
other radios will match up to.
Repeat
Repeat this on any other
radio you wish to clone.
©2018 Advanced Wireless Communications. All rights reserved. *All other trademarks are the property of their respective owners.
MINI 3 Wireless Cloning
Turn On Cloning
Begin with the radio in the
off position. Hold down the
monitor button while turning
the radio on.
Begin Cloning
Press and release the Push-
To-Talk button on the master
unit to begin the cloning
process.
If Done Correctly
A "C" should light up on the
screen.
While Cloning
The master unit's LED will
light steady red. The other
radios' LED will flash red.
20809 Kensington Blvd, Lakeville, MN 55044
www.advancedwireless.com
(800) 475-5852
500463