Download Print this page
Craftsman 57993 Installation Manual

Craftsman 57993 Installation Manual

Smart controller kit

Advertisement

Quick Links

Smart Controller Kit Installation Guide
Installation requires no special tools—you'll just need a
screwdriver, stepladder and smartphone!
Model 57993
NOTE: Check your Craftsman garage door opener for compatibility.
Some Craftsman openers are not compatible with this device.
Series 100 openers (models 57933, 57943, 57953, 57963, 57973
& 57983) and 53XXX models without AssureLink
are compatible.
®
Models 3043, 30437, 54XXX series, 57915 and 57918 models are
NOT compatible.
sears.com
1-888-331-4569

Advertisement

loading

Summary of Contents for Craftsman 57993

  • Page 1 Installation requires no special tools—you’ll just need a screwdriver, stepladder and smartphone! Model 57993 NOTE: Check your Craftsman garage door opener for compatibility. Some Craftsman openers are not compatible with this device. Series 100 openers (models 57933, 57943, 57953, 57963, 57973 &...
  • Page 2 Thank you for purchasing the Craft sman Smart Controller Kit! Please read and follow all installation instructions. Homeowners should retain this guide for reference. TIP: If you are a professional installer, setup within the beam Home app should be done using the homeowner’s smartphone. ______________________ Date Installed: Controller...
  • Page 3 Download the app & begin setup • While inside your home, download the “beam Home” app from the App Store (iOS) or Google Play (Android). • Open the app, and select “Setup Your beam.” • Follow prompts within the app to verify the WiFi network you’d like your controller to connect to, and enter your network password.
  • Page 4: Power Up The Controller

    Power up the controller • Locate the controller and power adapter . Plug the adapter into the DC IN port on the controller and a nearby power source. • The controller’s WiFi status light will blink orange to indicate it’s ready for setup.
  • Page 5: Program The Controller

    Program the controller • Follow prompts within the app, and when directed, press your phone screen tightly against the bottom setup port. TIP: It may be helpful to dim the lights or cup your hand over your phone during programming to minimize light interference. •...
  • Page 6 Scan the wireless door sensor code • Locate the wireless door sensor and follow prompts within the app to scan the code (found on the back of the sensor). • Enter a name to identify your door. • Unplug the controller and head out to the garage!
  • Page 7 Mount the wireless door sensor • Clean and wipe dry an area at the top of your garage door’s interior panel. • Remove the battery tab from the back of the wireless door sensor and mount to the cleaned area of the garage door using the adhesive hook and loop fastener strip.
  • Page 8: Mount The Controller

    Mount the controller • Locate the controller and power adapter , and grab your stepladder. • Clean and wipe dry your selected mounting location, either on the garage door opener or a nearby surface. Mount using the adhesive strip on the back of the controller. TIP: Mount the controller within 3 feet of the garage door opener and within 6 feet of a power source.
  • Page 9 Connect the opener cable to the controller • Locate the opener cable • Plug the black connector into the opener port on the top side of the controller. WiFi Status Opener Port Power Indicator DC IN Port...
  • Page 10 Connect the controller to the garage door opener • Unplug your garage door opener. • Using a small screwdriver, connect the other end of the opener cable to your garage door opener push button terminals. If there are already other wires present, they can be spliced together with the opener cable to share the same terminals.
  • Page 11 Power up the controller & opener • Plug the power adapter into the DC IN port on the controller and a nearby power source. • Plug your garage door opener back in. All done!
  • Page 12 Lead, which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov CRAFTSMAN LIMITED WARRANTY FOR ONE YEAR from the date of sale, the controller and sensor are warranted against defects in material or workmanship.
  • Page 13 Certifications Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
  • Page 14 Service Parts V2CC: Controller V2P: Power adapter V2CS: Wireless door sensor V2O: Opener cable V2CC V2CS Changing Sensor Battery To replace the wireless door sensor batteries: • Remove the sensor from the door and using a screwdriver remove both screws on the back of the sensor, •...
  • Page 15 Updating WiFi Credentials If you have recently updated your WiFi network name or password, you’ll need to update your WiFi settings within the beam Home app. To update your controller’s WiFi credentials: 1. Log into the beam Home mobile app. 2.
  • Page 16 Troubleshooting To view a list of common questions and answers, visit: https://www.sears.com/craft sman-series-100-smartcontroller-kit-wifi -en- abled/p-A060503257 and look for the product support guide or call: 1-888-331-4569 for technical support. Get the most from your Craft sman Smart Controller Kit! • Share access with others –...