Audio Operation - Jensen CAR710X Installation & Owner's Manual

Equalizer Menu
Time Alignment Menu

Audio Operation

From the Main Menu screen, Press the Equalizer icon on the
main menu screen to adjust Fader and Balance controls, Equalizer
(8-Band Tone Control and 8 Presets EQ Settings).
2 3
1
Adjustments:
To properly set the time alignment, you will need measure the distance
from each speaker (in ft) to where you want the "center stage" to be. for
example, if you want the position to be at the divers seat, then meausre
each speaker side (front & rear) to where your head is located and set
the distance accordingly.
Each vehicle will vary in distance, so settings will be different in each
case.
Surround Presets
1
Time Delay Setting
2
Speaker Positions
3
Reset to Default Settings
4
4
CAR710X
10