Advertisement
Contents
Connections
Changing the settings
1
Set the items below to the settings you want to
register.
The following settings from A to K can be memorized for MAIN
ZONE, and settings A and B can be memorized for ZONE2.
A Input source (v p. 85)
B Volume (v p. 86)
C Sound mode (v p. 134)
D Audyssey (Audyssey MultEQ
Audyssey Dynamic Volume
E "M-DAX" (v p. 177)
F "Adjusting the volume of each channel to match the input source
(Channel Level Adjust)" (v p. 128)
G "Displaying your desired video during audio playback (Video
Select)" (v p. 130)
H "Adjusting the picture quality for your viewing environment
(Picture Mode)" (v p. 131)
I "All Zone Stereo" (v p. 132)
J "Speaker Preset" (v p. 133)
K "HDMI Video Output" (v p. 192)
0 Press and hold SMART SELECT while a radio station is being received is
being played back with any of the following sources, the current radio
station is memorized.
0 Tuner / Internet Radio Station
Front panel
Display
Playback
®
XT32, Audyssey Dynamic EQ
®
, Audyssey LFC™) (v p. 180)
Rear panel
Settings
2
Press MAIN or ZONE2 to select the operating zone with
the remote control.
The button for the selected zone is lit.
3
Press and hold the desired SMART SELECT until
"Smartz Memory" or "Z2 Smartz Memory" appear on
the display.
The current settings will be memorized.
z is displayed the number for the SMART SELECT button you
pressed.
®
,
o Changing the Smart Select Name
The MAIN ZONE Smart Select name displayed on the TV screen or
display of this unit can be changed to a different name.
For the name change method, see "Smart Select
Names" (v p. 246).
155
Remote
Tips
Appendix
Index
Advertisement
