Asus PRIME B365-PLUS Manual page 11

CPU and chassis fan connectors (4-pin
CPU_FAN, 4-pin CHA_FAN1~3)
Connect the fan cables to the fan
connectors on the motherboard, ensuring
that the black wire of each cable matches
the ground pin of the connector.
Do not forget to connect the fan cables
to the fan connectors. Insufficient air
flow inside the system may damage the
motherboard components. These are not
jumpers! Do not place jumper caps on the
fan connectors! The CPU_FAN connector
supports a CPU fan of maximum 1A (12 W)
fan power.
Intel LGA1151 CPU socket
®
Install Intel LGA1151 CPU into this surface mount LGA1151 socket, which is
®
designed for 9th / 8th Generation Intel
processors.
For more details, refer to Central Processing Unit (CPU).
RGB headers (4-pin RGB_HEADER1, RGB_HEADER2)
These headers are for RGB LED strips.
The RGB header supports 5050 RGB
multi-color LED strips (12V/G/R/B), with a
maximum power rating of 3A (12V), and
no longer than 3m.
Before you install or remove any
component, ensure that the ATX power
supply is switched off or the power cord is
detached from the power supply. Failure
to do so may cause severe damage to the motherboard, peripherals, or components.
• Actual lighting and color will vary with LED strip.
• If your LED strip does not light up, check if the RGB LED extension cable and the
RGB LED strip is connected in the correct orientation, and the 12V connector is
aligned with the 12V header on the motherboard.
• The LED strip will only light up when the system is operating.
• The LED strips are purchased separately.
1-3
CPU_FAN
CHA_FAN2
Core™, Pentium Gold, and Celeron
® ®
RGB_HEADER
PIN 1
+12V G R B
B
R
G
1 2 V
CHA_FAN3
CHA_FAN1
CHA FAN PWM
CHA FAN IN
CHA FAN PWR
GND
®
ASUS PRIME B365-PLUS