Starting Procedure; Adjusting The Volume; Setting The Auto-Launch Function - Pioneer AVH-Z9190BT Owner's Manual

3
Touch [Smartphone-related Settings].
4
Touch [Driving Position].
[Left]
Select for a left-hand drive vehicle.
[Right]
Select for a right-hand drive vehicle.

Starting procedure

When connecting a smartphone to this product, settings are required according to the
connected device. For details, refer to Setup for iPod/iPhone or smartphone (page 18).
Wired connection
1
Connect an Android Auto™ compatible device to this product via USB.
2
Press .
3
Touch .
4
Touch [Android Auto].
5
Touch the Android Auto icon in the tab.
A Bluetooth connection with the Android Auto compatible device is automatically
established and a Bluetooth connection with any other devices are terminated.
Wireless connection
Before using Android Auto wirelessly, connect the device to this product via Bluetooth
(page 11).
1
Turn on the Wi-Fi function on the device.
2
Press .
3
Touch .
The device search screen appears.
Touch then skip to step 4 since the device list screen appears if Android Auto had
previously been used wirelessly with the device.
NOTE
The unit cannot detect the device unless the Bluetooth setting menu is displayed on the
smartphone screen.
4
Touch .
34
En
5
Touch a desired device on the screen.
The unit configures the connection then start the application.
TIP
You can use voice recognition function by pressing
NOTES
• For details on USB connection, refer to Connecting via the USB port (page 56).
• If twenty devices are already paired, the message confirming whether to delete the registered device
is displayed. If you want to delete the device, touch [Agree]. If you want to delete other device, touch
[BT Settings] and delete the devices manually (page 12).
• If Android Auto is turned on during a call on a mobile phone other than the Android Auto compatible
device, the Bluetooth connection will switch to the Android Auto compatible device after the call.

Adjusting the volume

You can adjust the guidance volume separately from the main sound volume when
Android Auto is used.
1
While Android Auto is activated, press VOL (+/-).
The volume menu will be displayed on the screen.
Touch to mute. Touch again to cancel mute.
Touch [+]/[-] to adjust the guidance volume.
Displays the main sound volume. To adjust the main sound volume, press
VOL (+/-) on the unit.
NOTE
The volume menu is displayed for four seconds. If the menu disappears, press VOL (+/-) again. The
menu reappears.

Setting the auto-launch function

If this function is set to on, Android Auto will launch automatically when an Android
Auto compatible device is connected to this product.
once Android Auto is activated.