Product Description; Commissioning; Transport Packing; Unpacking - Bosch TCE 60 Original Instructions Manual

2.3

Product description

!
Understand all the information related to
the machine; Understand how to prevent the
appearance from the accident; Understand how to
use the tire changer; Understand all the function;
Understand the entire control key; Understand each
operation process to avoid accident. The installation
of the machine must be correct operation correctly
and also execute the maintenance periodically.
Fig. 1: TCE 60
Pos. Name
1 Press roller
2 Pressor
3 Press arm
4 Contral handle
5 Press bent arm
6 Lead Screw
7 Press head
8 Locking handle
wheel
9 Limit handle wheel
10 Press lever
11 Support dish
12 Press roller
13 Cylinder
14 Centring cone
Robert Bosch GmbH
Function
Press tire edge and lead tire edge
enter steel ring groove.
Move front and back, install press
roller.
Main working arm.
Wiggle up and down and contral
each working arm move.
Assistance working arm.
Adjust press head height.
Press tire edge and prevent tire
edge slide out the steel rim.
Locking the press ruler and prevent
press ruler move.
Adjust position of press arm
Move front and back, install press
roller.
Lift the lower tire edge
Press tire edge and lead tire edge
enter steel ring groove.
Drive each working arm movement.
Assist tyre changer to fix tire.
Commissioning | TCE 60 | 19
3.

Commissioning

3.1

Transport packing

The machine should use the original package and then
be transported.
Warning
Do not place any other objects on the carton
3.2

Unpacking

As shown in the Figure, open the top package.
Plug the fork of the forklift from bottom of the original
package
Fig. 2: Unpacking
i
Keep the original package for the future
transporting.
i
When unpacking, the operator should wear the
proper protective tool such as gloves.
i
Carefully check the packing list of the machine to
see if there is any mistake related to the quantity of
the parts. If there is any mistake, please contact the
dealer at once.
1. Detach the upper cover of the carton and make
sure whether there is any damage or not during
transporting.
2. Take the standard accessories and the packaging
material out of the transportation crate.
i
The objects in the carton such as board, nails,
screws and plastic bags should be located at the
safe place.
i
If there is any pollutant or the indecomposable
substances, you should treat them as per the
regulation specified in t he local laws and
regulations.
en
|
2016-08-23 1 695 108 075