Advertisement
Mounting
The direct current generated by the solar panel can be converted into an alternating current and can
be fed into the power grid. Before installing the solar panel, thoroughly catch up on the local/national
regulations in force and register the unit timely, thus before installing it, with your local/national re-
sponsible agency/authority and your specific electricity provider, if required.
First of all, choose a suitable place to install the solar module, where at no time it will be
covered by another object. Placing the unit facing southwards (in the southern hemisphere
northwards) will guarantee a maximal generation of electricity.
The ideal inclination angle should be calculated by a qualified specialist company.
Take note of the respective safety regulations and installation instructions regarding the
chosen attachment, reducing the risk of accidents.
When installing the unit to a sloped roof, make sure to allow a distance of at least 30.5 cm
between the edge of the roof and the outer edge of the solar panel.
Before mounting inform yourself about the the regular weather conditions at your location to
ensure that the solar panel can be attached adequately according to the conditions.
Ensure that a sufficient earthing of the unit is provided and that the earthing cable is attached
securely to the frame of the solar panel. Make sure that the core of the wire is not damaged,
when earthing the approx. 16 mm long cable insulating cap.
If possible, use the same settings for all used solar panels.
Multiple solar panels of the same type can be in switched in a row and thus used as a cluster.
◦ When having the solar panels attached as a series connection, the total sum of the
voltage corresponds to the amount of each panel which is attached as one unit.
◦ When having multiple solar panels switched parallel, the voltage corresponds to the sum
of the individual solar panel.
Please note that all built-in parts need to correspond with the maximum short-circuit power of
the system, so that they do not overheat due to the voltage.
The cables can withstand a maximum temperature of 85
withstand a temperature of up to 105
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
℃
.
Item 62391–62394, 61993
℃
, whilst the connecting plugs can
Page 5
03
2021-1
Advertisement
