Advertisement
Safety of installation
Comply with all local and national regulations and laws and ensure that all necessary arrange -
ments have been made and all required permits have been organised before starting to install
the solar panel.
Make sure that you regard all safety notes of other used components during the installation,
too.
Do not install the unit in areas, in which flammable gasses are produced or collected.
Do not drill any holes into the solar panel or its frame.
Touching the connecting plug can cause sparks, fire, and/or electric shock, even if the solar
panel is not connected to any electrical supply, as it generates energy as soon as it is ex -
posed to sunlight.
By all means, keep children away from the unit and its connecting cables.
When installing the unit, cover the solar panel carefully with a non-conductive and opaque
board or something similar to avoid any electricity from being generated.
When installing the unit, only use superior quality insulated tools.
The unit needs to be earthed according to the local regulations. Accordingly install the earth -
ing cable to the unit frame.
Contact your local authorities regarding the valid fire safety regulations.
The installation of the unit to a roof can affect the fire safety of the roof, and a badly installed
or damaged unit can increase the risk of fire.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62391–62394, 61993
Page 4
03
2021-1
Advertisement
