Advertisement
The Master or Main Power Cable is the cord that runs from the floor system to the power supply box.
One end is a multi pin connector that plugs into the power supply. Orientation is critical when plugging
this plug in. The other is an L shaped corner floor trim piece that connects in the corner of the floor
where the Powered and Non-Powered trim pieces come together. The plugs coming from this piece
connects power to the Powered Trim.
Fig. 1-14shows the Main Supply cable and Powered Trim Piece upside-down.
Figure 1-13
Figure 1-14
The ARCH Portable Lighted Dance Floor System
Copyright USA Dance Floor, LLC
Advertisement
