USA Dance Floor ARCH-RGB Setup And Operation Instructions page 7

The edge of a dance floor panel is only ¾ of an inch high and is rounded. The edging of the floor can be
finished without beveled edging as shown in figure 1-10 or with beveled edging as shown in figure 1-11.
Figure 1-10
Figure 1-11
Optional
Aluminum Beveled Edging
NOTE:
All new floors come with brand new never been used plugs and sockets. This means they may
tend to be stiff and fit tight at first. To fix this it is recommended to apply a little marine grease on all the
connections.
The Dance Floor Panel's Outside Edging
Outside Edge
¾ inch
The ARCH Portable Lighted Dance Floor System
Copyright USA Dance Floor, LLC
Dance Floor Surface