Advertisement
Trim pieces come in two types and sizes. One type is Non-Powered Trim pieces and the other is
Powered Trim pieces.
Powered trim pieces are the wired trim. These are used to finish one of the two open edges of the floor
while hiding the wires that supply power. The floor panels are plugged into the sockets of the powered
trim and then the pieces are secured to the floors by way of stainless steel screws.
Po ered e te sio s are used et ee the ai po er a le's or er tri a d a other po ered
extension or powered end piece.
Powered end pieces are always used at the end of a length. (See Figure 1-5)
Figure 1-3:
Non-powered trim pieces have no wiring. These are used to finish the second open floor edge. Trim
extensions are used for extending to a jointing four or eight foot length. End pieces are used to finish the
end of a length. These trim pieces do not connect to each other. Rather they connect directly to the
floor sections by way of stainless steel screws.
Figure 1-4:
NOTE:
The optional slopped edging is secured to the trim pieces with special screws-in holes.
The Trim Pieces
POWERED TRIM PIECES
NON-POWERED TRIM PIECES
The ARCH Portable Lighted Dance Floor System
Copyright USA Dance Floor, LLC
8 foot powered extension
(95
13/16
8 foot powered end piece
(89
7/8
4 foot powered end piece
(41
7/8
8 foot trim extension
. )
(95
13/16
8 foot trim end piece
. )
(89
7/8
4 foot trim end piece
x . )
(41
7/8
. )
. )
. )
Advertisement
