Wiring And Addressing Information; Wiring Information - Bosch Analog Detector Series Installation And Operation Manual

Analog Detectors and Bases
X
Figure 4.2 Activating the Locking Mechanism
Release the locked detector head by pushing hard through the dimple (O) on the detector's
outer rim with a screwdriver (see Figure 4.3) and at the same time, turning the detector head
to the left.
O
Figure 4.3 Releasing the Detector
5

Wiring and Addressing Information

5.1

Wiring Information

WARNING!
Do not twist or loop the wires around the terminals. In and out wires for terminal connection
must be cut, stripped, and inserted as individual ends.
Bosch Security Systems, Inc.
X
Installation and Operation Guide
Wiring and Addressing Information | en
F.01U.173.498 | 1.3 | 2012.02
11
O