Kitchen System 1200 - Ninja BL700C Owner's Manual

Using the Ninja ™

Kitchen System 1200

PLEASE KEEP THESE IMPORTANT
SAFEGUARDS IN MIND WHEN
USING THE APPLIANCE:
IMPORTANT: Never add ingredients
into the container before placing
the attachment in first.
IMPORTANT: Attachments are not
interchangeable.
CAUTION: Blades are sharp! Use
extreme caution when handling
the blade assemblies. Always hold
them by the shaft.
IMPORTANT: When making dough,
always secure the base to the
countertop using the lock-in lever.
IMPORTANT: Never run the
appliance empty.
CAUTION: Use extreme caution
when processing hot foods
or liquids to avoid accidental
scalding or burns. Do not process
food or liquid that is hotter
than 180°F/82°C. Allow very
hot ingredients to cool before
processing.
When processing hot foods or
liquids, always open the spout cap
to vent the steam. Keep hands and
other exposed skin away from the
opening to prevent possible burns
or scalding.
CAUTION: Never attempt to
remove the container while the
appliance is still running.
WARNING: Never leave the
appliance unattended while in use.
8 TOLL FREE: 1-800-798-7398
BL700C_30_IB_ENG_110330_1.indd 8-9
™
BEFORE FIRST USE
1 Remove all packaging material and labels
from the appliance.
2 Wash the lids, pitcher, bowl and
attachments in warm, soapy water with
a soft cloth. Use caution when washing
the blade assemblies as the blades are
very sharp.
3 Rinse and dry thoroughly.
4 The pitcher, bowl, lids and
attachments, are all dishwasher safe.
It is recommended that the lids and
attachments be placed on the top rack.
Ensure that the attachments are removed
from the containers before placing in the
dishwasher.
5 Wipe the motor base and the suction feet
clean with a damp cloth.
Fig. 3a
Fig. 1
Fig. 2 Fig. 3b
HOW TO ASSEMBLE
CAUTION: Make sure that the motor base
is unplugged from the power source.
1 Place the motor base on a clean, dry,
level surface such as a counter or table
top. (Fig. 1)
2 Lower the pitcher or the bowl onto the
motor base. (Fig. 1)
3 Rotate the container to the left as far as
it will go. As the container rotates, it will
lower and the safety tabs on the bottom
of the container will slide under the
safety tabs on the top of the motor base.
(Fig. 2)
4 The pitcher or bowl can be placed on the
motor base two ways; the handle can be
on the front right corner or the front left
corner. (Fig. 3a, Fig. 3b)
5 Holding the desired attachment by the
shaft, place it onto the gear shaft inside
the container. Ensure that the attachment
fits around the gear shaft and that it is
standing straight. (Fig. 4a, Fig. 4b)
Shaft
Shaft
Fig. 4a Fig. 4b
HOW TO USE
1
Place the pitcher or bowl onto the motor
base and insert the desired attachment.
(See HOW TO ASSEMBLE.)
2 Add the ingredients to the container.
Make sure your total of ingredients don't
exceed the highest measured marking
line on the side of the containers.
MAXIMUM CAPACITY
40-oz Bowl
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 5 cups (40 oz.)
72-oz Pitcher
Dry - Do not exceed 2 1/2 cups (20 oz.)
Wet - Do not exceed 9 cups (72 oz.)
www.ninjakitchen.com 9
11-03-30 9:19 AM