Sony PCG-VX89 VAIO User Guide (primary manual) User Manual page 60

VAIO Computer Quick Start
Inserting a Disc
D i s c ( l a b e l
f a c i n g u p )
4 Press the disc onto the hub until the disc clicks securely into place.
If you do not seat the disc firmly over the hub, the disc may come loose while
it is in the drive. A loose disc may damage the optical drive and make
opening the drive tray difficult.
5 Push the drive tray gently to close it. The Busy indicator on the drive flashes
while your computer is reading data from the drive.
To ejecting a CD or DVD
1 Turn on the computer, and exit a power saving mode (Standby or Hibernate)
if one is active. See "Using power saving modes" for more information on
power saving modes.
2 Close all software programs that are open from the optical drive, and wait for
the LED indicator to turn off.
3 Press the Eject button on the optical drive cover to open the drive tray. The
drive tray slides out.
✍
If the Eject button does not work, turn off the computer and insert a thin, straight
object (such as a paper clip) into the manual eject hole next to the Eject button.
4 Lift the disc from the drive.
5 Push the drive tray gently to close it.
60