Pc Card Optical (Disc) Drives - Sony PCG-VX89 VAIO User Guide (primary manual) User Manual

VAIO Computer Quick Start
To gain access to the i.LINK optical drive
1 Click Start on the Windows® taskbar, and click My Computer. The My
Computer window appears.
2 Double-click DVD/CD-RW Drive. The DVD/CD-RW Drive window
appears.
To disconnect the i.LINK optical drive
1 Close any active programs to help prevent data loss.
2 Double-click the Safely Remove Hardware icon
Safely Remove Hardware window appears.
3 Select the i.LINK drive in the Hardware devices window, if it is not already
selected.
4 Click Stop. The Stop a Hardware device window appears.
5 Make sure the i.LINK drive is selected, and click OK. A message appears
stating it is now safe to remove the hardware device.
6 Unplug the i.LINK optical drive from the computer, port replicator, or
docking station.

PC Card optical (disc) drives

The PC Card drive enables you to read data stored on a DVD or CD. Your
computer may come with an external PC Card drive, depending on the model you
purchased. Once the PC Card drive is connected, you can use the preinstalled
software to create CDs or play DVDs.
✍
Do not use the i.LINK optical drive and the PC Card drive at the same time. Connecting
both devices to may cause the computer to malfunction.
If you connect a non-Sony DVD drive to your VAIO® computer, DVD playback
may not function properly. The DVD software (supplied) must be installed to
play a DVD. For best performance, use a Sony compatible DVD drive.
56
on the taskbar. The