Greencut GS6200 Instruction Manual page 76

76
is dry, clean and at a temperature between 0ºC and 45ºC.
• Always store the machine with the cutting element protection installed.
• If the machine is to be stored in an enclosed area, empty the fuel. If the fuel tank has to be emptied, this should
be done outdoors and in accordance with recycling regulations.
• Storage from 30 days without use:
1. Clean the outer parts thoroughly and apply a light layer of oil to all metal surfaces.
2. Remove the spark plug and put about 3 ml of oil into the cylinder through the hole in the spark plug. Slowly
pull the starter cable out 2 or 3 times so that the oil covers the inside of the engine evenly. Reinstall the
spark plug.
3. Blow dust/waste from the air filter element using compressed air if present.
4. Store the machine in a clean, dry, dust-free place.
5. Always make sure the chainsaw has the proper cover on the sword and chain assembly.
RECICLYING AND DISPOSING
Worn products are potentially recyclable and should not be disposed of in the usual bin. Help us protect the
environment and preserve natural resources.
Dispose of the appliance in an environmentally friendly way. Do not throw it away with the household rubbish. Its plastic
and metal components can be separated and recycled. Take this device to an approved recycling centre (green point).
Gasoline, used oils, oil / gasoline mixtures as well as objects stained with gasoline (e.g.: rags) should not be disposed
of in the usual trash, drainage, land, rivers, lake or sea. Objects stained with oil should be disposed of in accordance
with local regulations: take them to the most appropriate recycling centre.
The materials used in the packaging of the machine are recyclable: please throw them in the appropriate container.
GUARANTEE
GREENCUT guarantees all products for a period of 2 years (valid for Europe). This guarantee is subject to the purchasing
date and taking into consideration the purpose of use of the product.
In order to claim your guarantee, you must present your receipt of purchase and its description, as well as the defective
product.
The guarantee does not cover normal wear and tear, especially on blades, blade elements, turbines, lighting sources,
vent and transmission belts, impellers, air filters, spark plugs and damage caused due to improper use of the machine,
especially due to failure to comply with the operating and maintenance instructions.
In the event that repairs or modifications have been made by the consumer or any other than with the original
GREENCUT spare parts, the guarantee will be voided.
In the event of a justified guarantee claim, we are authorised, at our discretion, to repair or replace the defective tool
free of charge. Claims beyond those described in this guarantee will be invalid.