Table of Contents
Advertisement
3. Adjustment description
*Notes: Alignment should be done after 3 minutes warm up of TV.
3.1 B+ Voltages
1. All relevant connectors and modules must be connected and inserted.
2. Main voltage is at 220VAC, 50Hz.（voltage range:110VAC~240VAC,50Hz）
3. Connect a voltmeter to B+ (Cathode of D808) and switch on the set.
4. Input Philips test pattern signal and standard mode.
5. Adjust VR801, it should as the value in below form B+ Voltage.
Table 3.1.1: The B+ value for vary tubes
CRT type (Part Number)
A68ERF185X013/MS (44-29RFLT-HFCA)
A51QGT420X34(44-21RFLS-LGDA)
NX56-LA
Chassis Name
2008-05-19
Issued on
Updated on
B+ Voltage
125V+/-0.5V
108V+/-0.5V
Serial No.
Page 6 of 12
Page
1.0
Version
Advertisement
Table of Contents
