Advertisement
INSTALLATION
1.Put
3.5mm
screwdriver into the slot.
5. Fix the installation
backboard
with
bolts on the wall.
Note: Be sure to connect all the wires as per the wiring diagrams and keep it away from water,
mud and other material so as to prevent the unit being spoiled!
www.belimo.com
width
2.Open
the
face
cover.
6. Connect the cables on
two
the control board
EXT-HA-8023 • en-ap • 2020-11-10 • subject to changes
3.Remove the cables from
the control board
7. Firstly hang up the two
hooks
with
30
degree
angle
4 . As per wiring diagram,
connect it with terminals,
8. Press down the both
down sides to fix the
cover and finish the
installation
3
Advertisement
