Sony PCG-NV100 VAIO User Manual page 67

To connect to a parallel port printer
1.
Locate the Printer
2. Plug one end of the printer cable (not supplied) into this port, and plug the opposite end of the cable into the
parallel port on your printer.
3.
Make sure your computer's printer settings are properly set. See
more information.
To use a printer, you may need to install the driver software that came with your printer.
Connecting a Parallel Port Printer
See the manual that came with your printer for more information on its installation and use.
If your printer stops functioning after resuming from a power saving mode, see
information.
port on the rear panel of the computer.
Displaying the Sony Notebook Setup Screen
Troubleshooting the Printer
for
for more
Page 67