Novopro DJS2 Instruction Manual

Table of Contents

Download this manual

DJS2

I N S T R U C T I O N

M A N U A L

Manual version 1.0

This user manual will help you assemble and operate this product safely and

quickly, so please spend a few minutes to read through the enclosed information.

Due to continuous product development, please check for the latest version of this product manual at:

www.novopro.co.uk

Designed and engineered in the UK and manufactured in China for Novopro Ltd.

Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers.

At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal.

Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.

Table of Contents

Need help?

Do you have a question about the DJS2 and is the answer not in the manual?

Page 1 Novopro Ltd is a trade-only supplier and only supply wholesale to trade resellers. At the end of the products working life, please take it to a recycling plant for environmentally friendly disposal. Due to continuous product development, specifications and appearance are subject to change. E&OE. © Copyright Novopro Ltd.
Page 2 Thank you for purchasing this Novopro product. Unpacking and safety Please unpack your new product carefully. Your product should reach you in perfect condition. Please check that no damage has occurred during transit. If any damage is found or there are any missing pieces from the packing list, please contact the retailer you purchased it from immediately.
Page 3 Assembly Step 1 (diagram A) Ensure that you have everything listed in the above packing list and that you have enough space around you to assemble the unit. Lay out the pieces on the ground as per diagram A and ensure that ALL beams have the hook-and-loop fastener strips facing inwards, towards the centre of each panel (as shown below).
Page 4 The hook-and-loop strips will stick to each other and secure the scrim. Smooth out any wrinkles and repeat for each panel. Your Novopro DJS2 is now ready for use. By angling the four frames, the unit will be sufficiently stable but due diligence and appropriate safety measures must be implemented and adhered to within public areas.