Super Io Configuration - ASROCK IMB-V2000 User Manual

3.3.4 Super IO Configuration

COM1 Configuration
Use this to set the parameters of COM1.
COM2 Configuration
Use this to set the parameters of COM2.
COM3 Configuration
Use this to set the parameters of COM3.
Type Select
Use this to select COM3 port type: [RS232], [RS422] or [RS485].
COM4 Configuration
Use this to set the parameters of COM4.
COM5 Configuration
Use this to set the parameters of COM5.
COM6 Configuration
Use this to set the parameters of COM6.
Parallel Port
Enable or disable the Parallel port.
Device Mode
Select the device mode according to your connected device.
Change Settings
Select the address of the Parallel port.
WDT Timeout Reset
This allows users to enable/disable the Watch Dog Timer timeout to
reset the system. The default value is [Disabled].
31