Fimco TC-10-P-BOM Assembly / Operation Instructions / Parts

5301461
MODeL NO. tc-10-P
Assembly / OPerAtiOn instructiOns / PArts

asseMbLY

steP : turn plastic cart body (0) upside down for ease of as-
sembly.
steP 2: bolt axle housing () to the underside of the cart body
using the 3/8" - 6 round head screws (3).
*NOTE* A 3/8" flat washer (4) should be placed between the
head of each screw and the plastic cart body.
STEP 3: Bolt handle (14) and yoke brace (8) to the front of the
cart (sandwich the flat plate on the handle between the plastic cart
body and the yoke brace when bolting).
STEP 4: Bolt the front tubes of the handle to the plastic body us-
ing the 5/16" - 1 3/4" bolts (7) provided.
steP 5: Position the folding tongue assembly (5) on the axle
housing and the yoke brace so the tongue latch (5.3) is forward
and pointing downward.
steP 6: slip the axle shaft (6) into the axle housing and through
the rear of the folded tongue assembly.
STEP 7: Position tires (5) on axle shaft.
STEP 8: Place 3/4" machinery bushings (9) on the axle shaft.
steP 9: cotter pin (2) wheels in place.
steP 0: remove hairpin cotter (5.6) and 5/6" clevis pin (5.5)
from the tongue assembly (see Detail A).
steP : unfold tongue assembly and replace 5/6" clevis pin
with hairpin cotter in front hole.
steP 2: invert trailer.
steP 3: ready for use.
this unit is warranted againts defects in materials and workmanship to the orginal purchaser, under normal use and service, for a period of nintey (90) days from date of sale. During
the warranty period, we will repair or replace at our option free of charge to the original purchaser, any part of the unit that our examination shows to be defective in workmanship or
materials. this warranty does not apply to damage in transit or damage caused by misuse, abuse, neglect, normal wear, or alterations by unauthorized persons.
10 cu. POLY traiLer cart
to Dump: Pull latch toward mower, and cart body will tilt back to
dump position.
to return to Pulling Position: Push down on the front of the
cart body until latch engages and pedestal secures to the tow bar.
tractor speed should be governed by weight of load. the heavier
the load, the slower the speed for safe operation.
Check tire pressure at regular intervals. Proper inflation will pro-
long life of tires.
NOTE: 700 lbs. maximum capacity
Approximate weight  cu. Ft.
Dirt: 50 lbs.
sand: 25 lbs.
Gravel: 0 lbs.
Max Speed: 4 MPH
this unit is intended for use only with riding mowers or tractors.
It is definitely not for highway use, being pulled at high speeds,
or transporting passengers of any sort. such use could result in
injuries for which we cannot be held responsible.
PLease DO NOt returN tHis MercHaNDise tO tHe
stOre. caLL us aND We WiLL taKe care OF aNY PrOb-
When ordering parts, always give model number, part number,
FIMCO INC. • 1000 Fimco Lane • North Sioux City, SD 57049
1000 FIMCO LANE • P.O. BOX 1700 • NO. SIOUX CITY, SD 57049
TOLL FREE: 800-831-0027 • TOLL FREE FAX: 800-494-0440
Form No. 970 (5004667 2/07)

LiMiteD WarraNtY

5301474
MODeL NO. tc-10-P-bOM

usiNG YOur DuMP cart

MaiNteNaNce iNstructiONs

WarNiNG DaNGer OF iMPrOPer use
OF traiLer cart
LeM YOu MiGHt HaVe WitH tHis PrODuct.

HOW tO OrDer Parts:

part description and inspector number.
seND tO:
800-831-0027 • P: 605-232-6800 • F: 605-232-6814
W W W . F i m c O i n D u s t r i e s . c O m
Printed In U.S.A.
Page