Fimco TC-15-HP Owner's Manual

Owner's Manual
General Information
Thank you for purchasing this product. The purpose of this
manual is to assist you in operating and maintaining your trailer
cart. Please read it carefully, as it furnishes information which
will help you achieve years of trouble-free operation.

Warranty/Parts/Service

For home usage, products are warranted for one year from date
of purchase against manufacturer or workmanship defects.
Commercial users have a 90 day warranty.
Your authorized dealer is the best source of replacement parts
and service. To obtain prompt, efficient service, always
remember to give the following information...
- Correct Part Description and/or part number.
- Model number/Serial number of your sprayer.
Part descriptions and part numbers can be obtained from the
illustrated parts list section(s) of this manual.
Whenever you need parts or repair service, contact your
distributor/dealer first. For warranty work, always take your
original sales slip, or other evidence of purchase date, to your
distributor/dealer.
Model: TC-15-HP (5302027)
(15 Cubic Ft. Poly Trailer Cart)

Assembly

Most of your cart will be pre-assembled at the factory. Finish
assembly by following the next steps:
- Bolt the hopper to the tubular frame, with the 12 truss head
screws. Secure to the frame with 5/16" whiz locknuts.
- Bolt the tongue assembly (which should be pre-assembled)
around the tubular frame directly under the hopper. This will
'sandwich' around the bolted-together tubes under the hopper.
- Slide a machinery bushing (Item 8) onto the axle pin.
- Slide the pin with the machinery bushing through the axle hole,
feeding it from the outside of the wheel, towards the center of
your cart.
- Place another machinery bushing over the pin, after fed through
the wheel, then slide complete wheel/axle assembly into the axle
receiver tube on the frame. Secure in place with the provided
cotter pin.
(Repeat for other wheel)

Using Your Dump Cart

To Dump: Step on foot plate located in the middle of the tongue.
Step and lean towards the rear of the cart. The cart will tilt back to
the dump position.
To Return to Pulling Position: Push down on the front of the
cart body until the latch engages and locks to the tow bar.
Your pulling vechicle's speed should be governed by the weight of
the load. The heavier the load, the slower the speed for safe
operation.
www.fimcoindustries.com
1000 FIMCO Lane, P.O. Box 1700, North Sioux City, SD 57049
Toll Free Phone: 800-831-0027 : Toll Free Fax: 800-494-0440
Form No. 2063 [5008338 (03/14)] Printed in the U.S.A.