Warning Indicators - Beko DU 7111 GA1 User Manual

Allergy UK is the brand of the
British Allergy Association. Seal
of Approval is created to guide
people that require
recommendation about a
product that the related
product restricts / reduces / eliminates the
allergens or reduces the allergen content
significantly in the ambient where allergy
patients exist. It aims to provide assurance
that the products are tested scientifically or
examined in a way to provide measurable
results.
5.5 Auxiliary functions
Audible warning
Drying machine makes an audible warning
when the programme is completed. If you don't
want it to make an audible warning, press the
"Buzzer" button. When you press the Buzzer
button, a light will illuminate and no audible
warning will be made when the programme
ends.
C
NOTE
• You can select this function before or
after the programme starts.
Time Delay
If you wish to dry your clothes at a later time,
thanks to the time delay function, you can delay
the program start up to 3 hours, 6 hours or 9
hours.
Open the loading door and put the laundry in.
Select the drying program. Press the time delay
button to set the desired delay time. When the
time delay button is pressed once, a 3-hour
delay is selected and the relevant indicator
lights up. When the same button is pressed
again, 6 hours; and if pressed once more, 9
hours delay will be selected.
If you press the time delay button again,
delayed start will be cancelled. After selecting
the delayed start, press the "Start/Pause"
button to start the delayed start for the selected
program.
58
C
NOTE
• Additional laundry may be loaded/taken
out during the delayed start time. At
the end of the time delay countdown,
the warning symbol disappears and the
drying process starts.
Changing the delay time
If you want to change the time during
countdown, turn the on/off/program selection
knob to cancel the program. Select the desired
program and repeat the delayed start process.
Cancelling the delayed start function
If you wish to cancel the delayed start
countdown and start the program right away,
rotate the on/off/program selection knob
to cancel the program. Select the desired
program and press "Start/Pause".

5.6 Warning indicators

C
NOTE
• Warning indicators may vary depending
on the model of your dryer.
Filter cleaning
When the programme is completed, the
warning indicator for filter cleaning turns on.
Water tank
If the water tank fills up while the programme
continues, the warning indicator starts flashing
and the machine goes into stand-by. In this
case, empty the water tank and start the
programme by pressing the Start / Stand-
by button. Warning indicator turns off and
programme resumes.
Filter drawer /Heat exchanger cleaning
When the programme is finished, the cleaning
symbol of the heat exchanger or filter drawer
may light up.
Dryer / User Manual