Linnenberg JOHANN SEBASTIAN BACH Owner's Manual page 16

Connecting the Analog Output
Connect the left and right interconnect cables
from the BACH's outputs to your preamplifier left
and right inputs. To maintain best sound quality,
it is strongly recommended that balanced
audio connections to be used. This is not only for
the reason of the best possible performance, it is
also important for getting the desired overall
gain. The
symmetric
Unbalanced operation will result in a 6dB gain
loss.
Connecting a Turntable
BACH has two independent inputs for use with
two separate tonearms / turntables. These inputs
are labelled input A and input B.
Turntable Connection Types
For start listening, you only need to connect a
turntable to the BACH as you would do to any
other phono preamplifier. Nevertheless, please
take note of the following: BACH can be
connected to many different types of turntables.
To fully realize the sonic potential, use balanced
cable connections
whenever
indicated gain
in -> symmetric
with
possible. Balanced
16
values refer
out operation.
XLR terminations
XLR cables
to