Subframe & brackets kit for tym tractor t394 (32 pages)
Summary of Contents for Bercomac 700518-2
Page 1
OWNER’S MANUAL Model Number 700518-2 BERCO Electric chute & deflector kit for Northeast & P.T.O. Snowblowers * ASSEMBLY * REPAIR PARTS * OPERATION * MAINTENANCE CAUTION: READ & FOLLOW ALL SAFETY RULES & INSTRUCTIONS BEFORE OPERATING YOUR EQUIPMENT 106818 106818_EN...
Page 2
NOTE: All warranty work must be performed by an authorized dealer using original (manufacturer) replacement parts. NOTE: Bercomac reserves the right to change or improve the design of any part or accessory without assuming any obligation to modify any product previously manufactured.
TABLE OF CONTENTS INTRODUCTION ..............................SAFETY PRECAUTIONS ............................TOOLS REQUIRED --------------------------------------------------------------------------------------------------------------------- ASSEMBLY Step 1: Installation of the Electric Chute Rotation Kit on the Northeast Snowbower ....... Step 2: Electric Deflector Adjustment Kit ..................... Step 3: Installation of the Electric Control Box ..................TROUBLESHOOTING .............................
INTRODUCTION TO THE PURCHASER This new accessory was carefully designed to give years of dependable service. This manual has been provided to assist in the safe operation and servicing of your attachment. NOTE: All photographs and illustrations in the manual may not necessarily depict the actual models or attachment, but are intended for reference only and are based on the latest product information available at the time of publication.
SAFETY PRECAUTIONS Careful operation is your best insurance against an accident. Read this section carefully before operating the tractor and attachment. All operators, no matter how experienced they may be, should read this and other manuals related to the tractor and attachments before operating. It is the owner's legal obligation to instruct all operators in safe operation TRAINING WHENEVER YOU SEE THIS SYMBOL This symbol, "Safety Alert Symbol", is used...
ASSEMBLY STEP 1 INSTALLATION OF THE ELECTRIC CHUTE ROTATION KIT ON THE SNOWBLOWER NOTE PICTURES SNOWBLOWER WITH CHUTE OUTPUT LOCATED AT LEFT. FOR A SNOWBLOWER WITH CHUTE OUTPUT LOCATED RIGHT, FOLLOW ALL INSTRUCTION BUT INVERSE THE SIDE INSTALLATION CHUTE ROTATION. Dismount the supports (item 1) and rotation worm (item 2), the chute (item 3) and rotation ring (item 4) if already installed.
ASSEMBLY STEP 2 INSTALLATION ELECTRIC DEFLECTOR ADJUSTMENT KIT : Remove the two knobs (item 1) from the deflector and replace them by two nylon washers 11/32’’ and two 5/16" nylon insert lock nuts. DO NOT TIGHTEN COMPLETELY so that the deflector moves freely.
ASSEMBLY Secure the bracket with two 1/4 x 1/2" screws and nylon insert lock nuts (item 1) (nuts on the outside). Tighten the screws firmly. Secure with screws Install the arm (item 1) on the deflector (item 2) with a 1/4 x 3/4"...
ASSEMBLY Thread the wires on the frame to the front where they will not be seen and where they won’t touch any hot or moving parts. Attach to the vehicle’s frame using the tie wraps. NOTE: It is recommended to place the wire connectors as close as possible to the subframe.
Page 11
PARTS LIST ELECTRIC CHUTE & DEFLECTOR KIT Ref. Qty. Part # English description Description française Réf. Qté. Pièce # Bracket Support 103375 Electric motor Moteur électrique 106147 Spacer Espaceur 103361 Oil lite bushing Coussinet imprégné d'huile 103362 Plate Plaque 103363 Bras 103364 Lever...
Page 12
WHEN PERFORMANCE & DEPENDABILITY ARE NON NEGOTIABLE ! Bercomac Limitée 92, Fortin North, Adstock, Quebec, Canada, G0N 1S0 WWW.BERCOMAC.COM PRINTED IN CANADA (ORIGINAL NOTICE)
Need help?
Do you have a question about the 700518-2 and is the answer not in the manual?
Questions and answers