Fora ATMS Training Manual page 4

Part 2: App Setup Continued
2. (Optional) [WiFi Printer]
iFORA TM has the capability to connect to
a thermal printer which prints a receipt after
measurement. The receipt shows the date,
time, measurement, and ID photo. The function
is turned off by default. To turn the printing
function on, please refer to the ATMS Printer
manual.
To check to make sure the WiFi Printer is
enabled, open the iFORA TM app and go to
Settings > Export Data.
Switch on the option for "WiFi Printer".
Printer icons:
Printer function enabled for the app, but
printer is not connected.
Printer is in active mode.
iPad is connected to printer directly
(during printer setup).
Setting Page
1. [Alarm Temperature] Set the temperature
threshold that will trigger an alarm sound if a
reading higher than this value is detected.
2. [Photo Retention] Define how many days the
photos will be kept in the iPad's memory.
3. [Location] Note the location where the ATMS
station is placed. This information syncs to
the ATMS Cloud and is beneficial if you have
multiple stations under one account and need to
identify specific data.
4. [Photo Control] Choose for the iPad to take
photos during all readings, during an alarm only,
or for the iPad to take no photo at all.
5. [Temperature Unit] Choose between Celsius or
Fahrenheit.