PRIMAL TREESTANDS WRAITH 270 Setup Instructions

PRIMAL TREESTANDS WRAITH 270 Setup Instructions

Treestands hub style ground blind

Advertisement

TREESTANDS
SET UP INSTRUCTIONS
WARNING: Read all instructions and safety warnings and follow them thoroughly. Failure to follow
these instructions may result in serious injury or death.
Step 1: Remove blind from carry bag. While the blind is still folded, set blind on ground with
the corners pointing up and the hubs facing the down.
Step 2: Release the blind and let it unfold. The roof hub should be facing up.
Step 3: While holding a corner of the blind with one hand and the roof hub loop with the other,
pull upwards on the roof hub to expand the roof of the blind.
STEP 1
Corners
Hubs
Step 4: Lift one edge of the roof up while the other edge is resting on the ground. Grab a hold
of a wall hub loop and pull to expand the wall.
Step 5: Walk around the blind and expand the remaining walls.
Step 6: Place blind in the desired location and secure each corner to the ground using the
ground stakes supplied. To reinforce the blind from the wind, attach the tie down
ropes to each wall hub loop and stake to the ground.
STEP 4
WRAITH 270
Hub Style Ground Blind
STEP 2
STEP 5
primaltreestands.com
Roof Hub
STEP 3
STEP 6

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WRAITH 270 and is the answer not in the manual?

Questions and answers

Steven Leigh
July 17, 2025

The rods are out of the red pockets and the blind is all twisted up, and I have no clue where to start. Please advise. Really disappointed this blind is not sturdy at all and the fabric on the mesh likes to rip and I’m not hard on things. Thank you. I bought this through Mike Avery and spent $200 and not happy. Maybe you can figure it out.

Summary of Contents for PRIMAL TREESTANDS WRAITH 270

  • Page 1 WRAITH 270 Hub Style Ground Blind TREESTANDS SET UP INSTRUCTIONS WARNING: Read all instructions and safety warnings and follow them thoroughly. Failure to follow these instructions may result in serious injury or death. Step 1: Remove blind from carry bag. While the blind is still folded, set blind on ground with the corners pointing up and the hubs facing the down.
  • Page 2 TAKE DOWN INSTRUCTIONS WARNING: Read all instructions and safety warnings and follow them thoroughly. Failure to follow these instructions may result in serious injury or death. Step 1: Remove stakes from the ground. Step 2: From outside of the blind, push inward on a wall hub to collapse the wall. Walk around the blind and repeat to collapse the remaining walls.

Table of Contents