Specifications; Indoor Alarm Display; Outdoor Transmitter; Ic And Fcc 15 Approval - Sentry 110 Operating Manual

Sentry
Liquid Level Alarm

6. SPECIFICATIONS

6.1 Indoor Alarm Display

Power Supply 120VAC, 60 Hz input, 12VDC 5W output, UL
listed, CSA certifi ed, indoor unit, power con-
sumption typically .05 watts, 0.9 watts maximum
during alarm condition
Enclosure fl ame retardant ABS
High level, Low level function selectable
LED tricolor
Audible alarm solid state transducer, 80db @ 10cm
Transceiver ISM 2.4GHz, 12 channels available, -40°C to
85°C rated, IC and FCC 15 approved

6.2 Outdoor Transmitter

Power four AA batteries, battery life 3 years under nor-
mal operation
Enclosure PVC NEMA 6P
High level, Low level function selectable
Transceiver ISM 2.4GHz, 12 channels available, -40°C to
85°C rated, IC and FCC 15 approved
Probe digital RF proximity, stainless steel, type 304 or
316, 22mm diameter x 100mm long, cable - 2
conductor, 18 Ga, SJOOW jacket, 5m (16 feet)
or 10m (32 feet)
Optional relay dry contacts normally open, 2A @ 30 VAC or
output VDC

6.3 IC and FCC 15 Approval

Contains Model XBEE3-PRO Radio, IC:1846A-XBS2C
Contains FCC ID: MCQ-XBEE3-PRO
The enclosed device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions: (i) this
device may not cause harmful interference and (ii) this device
must accept any interference received, including interference
that may cause undesired operation.
Page 16
Model 110 Operating Manual