Technical Information - Philips HearLink CROS MNR T R Instructions For Use Manual

Technical information

The transmitter contains a radio
transceiver that uses short-range
magnetic induction technology working
at 3.84 MHz. The magnetic field
strength of the transmitter is very weak
and is always below 15 nW (typically
below –40 dBμA/m at a distance of
10 metres (–12.20 dBμA/ft at a distance
of 33 feet)).
The transmitter complies with
international standards concerning
electromagnetic compatibility and
human exposure.
Only use your transmitter in areas
where wireless transmission is
permitted.
Due to the limited space available
on the transmitter, relevant approval
markings can be found in this booklet.
44
About Getting started
Additional information can be found in
the Specification Guide on
hearingsolutions.philips.com
USA and Canada
This device contains a radio module
(DA AU5 MNR R) with the following
certification ID numbers:
FCC ID: 2ACAHAU5MRTRC
IC: 11936A-AU5MRTRC
Note:
The device complies with Part 15 of the
FCC rules and with Innovation, Science
and Economic Development Canada's
licence-exempt RSSs standards.
Operation is subject to the following
two conditions: (1) this device may not
cause harmful interference, and (2) this
device must accept any interference
received, including interference that
may cause undesired operation.
Daily use Warnings
More info