To reattach the earpiece and change the filter on the Philips HearLink miniRITE T:

To change the ProWax filter:
1. Use the tool that has two pins—one empty and one with a new wax filter.
2. Insert the empty pin into the old wax filter in the earpiece and pull it out.
3. Insert the new wax filter using the other pin.
4. Remove the tool and discard it.

To reattach the earpiece:
- If the earpiece was removed, re-insert it correctly into the speaker.

Note: If you use a mold or LiteTip, only your hearing care professional can replace the wax filter.

This answer is automatically generated

seth pierrepont

January 27, 2025

HearLink 9040 miniRITE T R 85 Right Side blinks groups of 3 orange flashes and is not charging

1 comments:

Mr. Anderson

February 10, 2025

The Philips HearLink miniRITE T is blinking in groups of 3 orange flashes because the battery is low. The hearing aid is not charging because possible causes include the charger not being turned on, incorrect seating in the charger, extreme temperatures, or an issue with the charger itself. To resolve this, check the charger’s power connection, ensure proper placement of the hearing aid in the charger, and move it to a location with a temperature between +5°C and +40°C.

This answer is automatically generated