Advertisement
7. "Mode"
Press to select different wind modes in the following sequence:
normal → natural → sleep, and the corresponding LED indicator
will turn on. There is no indicator for normal mode.
Normal mode: the fan runs at a fixed speed selected without any change.
Natural mode: the fan speed fluctuates between low, medium and high on
a random pattern.
In the natural mode, the LED indicator shows the selected mode; the speed
indicator will only show the initial wind speed; other changes during natural
mode will not show (i.e., if the natural mode is turned on high speed, the
speed indicator will only show the high indicator without switching).
Sleep mode: Regardless of the speed set before selecting sleep mode, the
sleep wind mode will start on the current setting. The wind speed will start
lowering in 30 minutes intervals, and the speed LED indicator will show the
speed changes at the same time until the lowest speed is reached. If there
is a timer set at the same time, once the timing interval is over the unit will
shut down.
8. "Cooling"
In working mode, press to turn on/off the cooler function, and
the corresponding LED indicator will turn on.
" Screen off"
9.
(only on remote)
In working mode press for all the LED indicators to turn off.
Press again on the remote or press any button on the unit's control panel
when the LED display is off to turn it back on, then press any other button
to execute the corresponding function.
CONTROLS & OPERATION
11
Hide quick links:
Advertisement
