Removing The Port Replicator - Sony PCG-GRX690P Primary User Manual

VAIO Computer Quick Start
4 Align the connector on the bottom of the computer with the port replicator
connector, and push the computer down until it clicks into place.
Attaching the Port Replicator
C o m p u t e r

Removing the port replicator

To remove the port replicator
1 Close any active programs to prevent data loss.
2 Double-click the Safely Remove Hardware icon
Safely Remove Hardware window appears.
3 Click to select the floppy disk drive in the Hardware devices window, if it is
not already selected.
4 Click Stop. The Stop a Hardware device window appears.
5 Make sure the appropriate device is selected, and click OK. A message
appears stating it is safe to remove the hardware device.
6 Pull the release levers on each side of the port replicator to release the it from
the computer.
126
P o r t r e p l i c a t o r
on the taskbar. The