Cleaning Instructions - Jiffy Steamer Esteam J-Series Owner's Manual

Jiffy ® J-1/J-2/J-200 /J-2000 Cleaning
1. Remove hose from unit. Use caution as hose may be hot.
2. Run steamer for 5 minutes in normal operating mode.
3. Turn unit off and unplug from outlet.
4. Use a water hose to clean the hose attachment if blocked with sediment
build-up. This should remove most deposits from the hose itself.
5. Remove water bottle and any excess water. Pour 1 bottle of Jiffy
Cleaner into steamer, wait two hours.
6. Do not steam with the liquid cleaner solution in the unit.
7. Pour out liquid cleaner.
8. Rinse with clean water 2 or 3 times by filling water cup with water and
empty by allowing water to exit the water cup area.
9. If steamer is not completely clogged, this should
clean the internal parts of the unit and remove
most sediment build-up. Repeat process as
necessary until all sediment is removed.
NOTE: Jiffy ®
recommends the liquid cleaner to be
used on a regular basis every 3 to 6
months depending on your water supply.
We suggest using the liquid cleaner as a
preventative measure rather than a cure.
In most cases, a unit that is severely
clogged will require disassembly to
properly clean and prolong the life span
of your unit. A Jiffy
provide many years of quality steaming if
maintained and cleaned regularly.
28
Steamer Company
® Steamer will
Instructions.
® Liquid