FIAM. RIALTO NIGHT Manual page 8

2
Safety instructions
2.3) Use
2.3.1) Intended Use
Once removed from its original packaging, the RIALTO NIGHT Bedside Table must be placed on a perfectly flat surface.
All the RIALTO NIGHT Bedside Table's supporting bases must be resting firmly on the surfaces on which it is placed; otherwise,
the RIALTO NIGHT Bedside Table may lose stability, making it hazardously unstable.
Weights, objects and loads must be evenly distributed across the surface of the RIALTO NIGHT Bedside Table and well balanced
in order to ensure stability and safety. Unevenly placed or unbalanced weights, objects and loads on the surface of the RIALTO
NIGHT Bedside Table may reduce its stability and thus its safety.
Sharp items or anything which may damage the glass (such as chemical products containing hydrofluoric acid) should not be
placed on the surface of the RIALTO NIGHT Bedside Table. If objects of this kind are placed on the surface of the RIALTO NIGHT
Bedside Table in spite of this warning, you are urged to take adequate precautions to prevent damage to the glass.
When placing sharp objects on the surface of the RIALTO NIGHT Bedside Table, a mat of insulating material (such as rubber, cork,
plastic or leather) thick enough to dampen any impacts should be placed between the float glass surface and the sharp objects.
Never place items which may damage the float glass (such as chemical products containing hydrofluoric acid) on the surface.
2.3.2) Warnings - Incorrect use and Non-recommended use
Below, we provide a series of warnings and examples of incorrect uses or procedures which reduce the safety of the RIALTO NIGHT
Bedside Table.
The series of warnings and incorrect uses or procedures provided below is purely guideline and does not cover all the possible
circumstances for incorrect or non-recommended uses of the RIALTO NIGHT Bedside Table, which must be evaluated on each
occasion.
Do not sit, lean or stand upon the glass surface of the RIALTO NIGHT Bedside table.
Do not use the float glass surface of the RIALTO Bedside Table as a chopping surface.
Do not strike the RIALTO NIGHT Bedside Table with hammers or pointed items which may crack or shatter the glass.
Do not use powder detergents or detergents containing abrasives for cleaning the RIALTO NIGHT Bedside Table, since they may
damage the float glass.
Do not use the RIALTO NIGHT Bedside Table for DIY work or for mechanical, electrical or electronic repairs.
In normal conditions of use, do not tilt the product by more than 10°. Any higher angles might reduce the stability of the RIALTO
NIGHT Bedside Table.
Never place items at temperatures below -30°C (such as items just taken out of the freezer), or with temperatures above +30°C
(such as foods just removed from the oven) on the RIALTO NIGHT Bedside Table; exposing the table to stresses of this kind may
damage the float glass, reducing its strength and thus its safety level.
Never expose the RIALTO NIGHT Bedside Table to intense heat sources (such as stoves or ovens); exposing the table to stresses
of this kind may damage the glass, reducing its strength and thus its safety level.
Do not expose the RIALTO NIGHT Bedside Table to temperatures below -10°C or weather; exposure of this kind may damage the
glass, reducing its strength and thus its safety level.
The RIALTO NIGHT Bedside Table should be placed well away from items such as coat racks or ornaments which may accidentally
fall onto its surface.
2.4) Moving the Low Table
TTo ensure that the RIALTO NIGHT Bedside Table is moved in the conditions of the utmost safety, we urge you to comply with the
instructions provided below:
The product must always be handled by at least two people, wearing gloves which assure a good grip on the float glass.