Table of Contents
Advertisement
Monitors
The Monitor Settings screen is used to setup individual monitors.
Function
Monitor Number
Camera to be displayed
on start-up
Monitor text enabled
Text Line
Cameras in sequence
Sequence dwell time in seconds
Time
Date
Description
This defines the monitor that the settings are being applied to
When the system restarts, the camera that is defined in this box will be switched to
the defined monitor
Depending on the deployment of the monitor, it might be desired that it does not
have text
Choose the position that your text displays on the screen (position 1-12)
This shows the sequence in which the cameras are viewed (if left blank, all cameras
will display, in series). Click the 'Add all' to add every camera
Each monitor can switch at different speeds. This interval is defined in seconds
Tick the box to display the time stamp on your monitor
Tick the box to display the date stamp on your monitor
33
Advertisement
Table of Contents
