Setup - Order of Install
Unpack
1
Connect HDMI Monitor
2
Connect 1 keypad (supplied) to any of the powered key ports
3
Connect video to input 1
4
Connect monitor to output 1
5
Power ON the FBM, FBM Monitor and relevant peripherals
6
- Wait for the system to boot.
Connect to matrix WIFI with computer
7
Use web page interface to setup system settings
8
Check PTZ control with keypad
9
Connect remaining video sources
10
Connect monitors & extra keypads
11
If you have alarms, connect Alarm Cards
12
Step by Step Guide
This step-by-step guide can be used in conjunction with 'figure 1' on the previous page.
Connecting the HDMI monitor
A
1.
Plug-in HDMI lead from FBM into monitor.
2.
Plug in power into HDMI monitor.
3.
The monitor can be either freestanding or mounted
onto the back of FBM.
Make relevant connections as shown
B
on previous page (figure 1)
1.
Connect power to the matrix, the monitor and any
relevant peripherals.
Connect one keypad, then set keyboard addresses (p16).
2.
HDMI monitor setup
C
1.
Power ON
2.
Press 'AUTO' button
3.
Select HDMI
4.
Use +/- key to save setting
Wait for system screen on the monitor
D
(As shown in the photo on the right).
10