Safety 1st Alpha Omega 65 Instructions Manual page 27

3. Check if Your Vehicle Belts
Will Work With This
Child Restraint
This is very important because
not all vehicle belts will work with
child restraints.
Review pages 26-28 and your
vehicle owner's manual to determine
what kind of vehicle belt you have
and how to lock a child restraint in
place.
4. Route Vehicle Lap or
Lap/Shoulder Belt Through
Forward-Facing Belt Path
Do not twist belt.
5. Buckle Vehicle Belt
6. Tighten Belt
Place hand in child restraint.
Firmly push down while pulling
shoulder belt or the free end of lap
belt to tighten.
47
4358-7222 Alpha Omega 65 ENG.indd C47-C48 4358-7222 Alpha Omega 65 ENG.indd C47-C48
7. Tighten Tether
Push firmly on the back of the seat
and pull the tether strap to remove
all slack and create tension on the
strap.
8. Check Belt Tightness
Hold child restraint at the belt
path with your weakest hand.
Push and pull from side to side.
It should not move more than
2.5 cm (1 in.).
If it moves more than 2.5 cm (1 in.),
A. Putting your knee in the seat and pulling the belt tighter.
B. Reinstalling the child restraint.
C. Changing to a different seating location.
D. Switching to UAS belt installation if UAS anchors are
available in your vehicle.
you can try:
48
1/29/18 2:26 PM 1/29/18 2:26 PM