Richell 80015-7 Instruction Manual page 2

How to Assemble
1.
Installation of Back Panel, Side Panels
Attach Side Panels to Back Panel using Bracket,
Flat Washer, Spring Washer and Bolt. (4 places)
※Make sure the bolt holes on each 4 corners are
facing inward.
2.
Installation of Front Panel
※Do not remove Protective Tape (Top and Bottom)
on Front Panel.
Attach Front Panel to Side Panels using Bracket,
Flat Washer, Spring Washer and Bolt. (4 places)
3.
Installation for Top Panel
※Remove Protective Tapes (Top and Bottom)
(4 places).
（1）
Open the Door Panel.
（2）
Secure the Top Panel and Side Panel with flat washer, spring washer
and bolts in the order of 1 to 4 in the figure below. (4 places)
Use a Philip-head screw driver for assembly.
※Finish tightening all bolts after the product is assembled.
Door Panel
Back Panel
Left Side Panel
Flat Washer
Spring Washer
Bolt
Front Panel
①
③
2
Bracket
Right Side Panel
Protective Tape
Flat Washer
Spring Washer
Bolt
②
④