Getting Started; Set-Up - Alcatel One Touch Tribe OT-800 Manual

Hide thumbs Also See for One Touch Tribe OT-800:
Table of Contents

Advertisement

Memory card scanning completed.
Line switching
: indicates the selected line.
(1)
GPRS connection status (Blue - Activated).
GPRS attached.
GPRS connecting.
Music player active.
Message receipt in progress.
Sending a message.
Silence mode: your phone does not ring, beep or vibrate with
the exception of the alarm (see page 57).
Message unread
Message list is full: your phone cannot accept any new messages.
You must access the message list and delete at least one message
on your SIM card.
Antenna off mode.
A2DP connected.
Contact your network operator to check service availability.
(1)
17
2

Getting started .....................

2.1

Set-up

Removing or installing the back cover
Inserting or removing the SIM card
You must insert your SIM card to make phone calls.
Place the SIM card with the chip facing downwards and slide it into its
housing. Make sure that it is correctly inserted. To remove the card, press
the bottom and slide it out. Please power off your phone before you
remove the SIM card.
Check with your network operator to make sure that your SIM card is 3V or
(1)
1.8V compatible. The old 5 Volt cards can no longer be used. Please contact
your operator.
(1)
18

Advertisement

Table of Contents
loading

Table of Contents