Table of Contents
Advertisement
HOME
Edit the Home Channel configurations:
About the setting items of HOME Bchannel frequency
• Receive Frequency / Transmit Frequency
Enter any desired changes into Home Channel frequency. The FTM-6000R/E default Frequencies are pre-
entered into the ADMS-13 standard template.
A frequency that is out of the transceiver's range cannot be entered. When the error pop-up window is
opened, enter the correct frequency. Inputting the receive frequency, the transmit frequency is automatically
set.
• Offset Frequency
When a transmit frequency is not entered, transmission will be performed at a frequency obtained by
adding/subtracting the offset frequency to/from the receive frequency.
• Offset Direction
Set the frequency shift direction.
OFF:
The transmit frequency is not shifted.
-RPT:
The transmit frequency is shifted to the minus offset.
+RPT:
The transmit frequency is shifted to the plus offset.
-/+:
The transmit frequency is not shifted.
• Operating Mode
Select the operating mode for receive channel.
FM:
The selected frequency band is set to FM mode.
AM:
The selected frequency band is set to AM mode.
• TAG
By ticking the checkbox of this item, when recalling the memory channels, the set memory tag and receive
frequency are displayed. By Turning off the checkbox, the receive frequency is only displayed. This setting
is common to all memory channels.
• Name
Enter the desired memory name (up to 6 digits).
• Tone Mode
This item selects the Audio Squelch Code type.
• CTCSS Frequency
This item selects the Tone Frequency of the Tone Squelch.
24
Advertisement
Table of Contents
